System Specification - Fujitsu PSWITCH 2048T User Manual

FUJITSU PSWITCH
FUJITSU PSWITCH 4032P
LED Status
LED
Fan tray LED Solid Green
Solid Yellow
Off
Power Supply
LED
Solid Green
Solid Yellow
Blinking Yellow Power supply warning events where the power supply
Table 1-4: Rear LED status (FUJITSU PSWITCH 4032P)

1.4. System Specification

System Specification
Component
Switch fabric capacity
Forwarding architecture
Port packet forwarding rate
(at 64 Bytes)
MAC address entries
supported
Spanning Tree Support
Storm Control
Memory type
12
Condition
Fan powered on at expected rotates per minute
Fan failure
No power
Power is ok
Power supply critical event causing a shutdown; failure
continues to operate
Specification
[FUJITSU PSWITCH 2048T/P]
Non-blocking full wire speed on all packet sizes
[FUJITSU PSWITCH 4032P]
1,428 Mpps
Store and forward or cut-through
59,523,809 pps (40GbE).
14,880,952 pps (10GbE).
96K entries.
1,000,000 seconds programable.
Default 300 seconds.
Support IEEE802.1d STP.
Support IEEE802.1s MSTP.
Support IEEE802.1w RSTP.
Rate control based on packet / byte.
Unknown unicast (DLF) packet.
Broadcast packet.
Known & unknown L2MC packets.
Known & unknown IPMC packets.
Enable individual threshold per port.
12 MBytes buffer memory
User's Guide
December/2018