Linkaggregation Collecting Minimum - Fujitsu XG0224 User Manual

Hide thumbs Also See for XG0224:
Table of Contents

Advertisement

XG Series User's Guide
Default

5.1.1.23 linkaggregation collecting minimum

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
• If the master or backup link aggregation is undefined in the same backup group, its
settings are disabled.
• If definition conditions such as described above are contradictory, the relevant ports
are not linked up for use.
Change the settings referring to the system log message.
It is assumed that the normal link aggregation has been specified.
linkaggregation <group> type normal
Set the minimum number of member ports for link aggregation.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
linkaggregation <group> collecting minimum <count>
<group>
• Link aggregation group number
Set a link aggregation group number with a decimal number.
Range
1 to 13
XG0224
1 to 26
XG0448
1 to 22
XG0440DC / XG0440DCR
1 to 10
XG2600
<count>
• Minimum number of member ports
Set the minimum number of member ports with a decimal number from 1 to 8, where
communication with link aggregation is allowed. However, the communication of link
aggregation is disabled if the number of ports connected to the link aggregation is less
than the minimum number of member ports.
Also, the communication of link aggregation is disabled if the number of connected
ports decreases below the minimum number of member ports due to failure or other
reasons.
Configuration mode (admin class)
Set the minimum number of member ports to allow communication of the link
aggregation.
This command is used to stop communication until the link aggregation is assigned the
specific bandwidth in redundant configuration or other. If it is under the specific
bandwidth, the link aggregation communication is disabled.
If a number larger than the number of member ports effective for the setting is specified
as the minimum number of member ports, the communication of this link aggregation is
disabled.
It is assumed that 1 has been specified as the minimum number of member ports for the
link aggregation.
linkaggregation <group> collecting minimum 1
114
Chapter 5 Command Reference
Model
Port Information Settings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg0448Xg2600Xg0440dcXg0440dcr

Table of Contents