Radius Control Commands; Radius Recovery - Fujitsu XG0224 User Manual

XG Series User's Guide

5.44 RADIUS Control Commands

This section explains commands related to RADIUS control.
5.44.1 RADIUS Control Commands
This section explains RADIUS control commands.

5.44.1.1 radius recovery

Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Recover the RADIUS server.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
radius recovery group <group_id> auth <number>
<group_id>
• Group ID
Specify the ID of AAA group to be applied by the command.
auth <number>
• Authentication server definition number
Specify the definition number of the authentication server to be applied by the
command.
Operation mode (admin class)
Configuration mode (admin class)
The RADIUS server can be recovered manually from dead state to alive state.
Even the RADIUS server recovers from dead state, server remains dead when it cannot
communicate with the RADIUS server.
# radius recovery group 1 auth 2
#
551
Chapter 5 Command Reference
RADIUS Control Commands