Saving/Restoring Configuration Information Using Usb Memory - Fujitsu XG0224 User Manual

XG Series User's Guide
Restoring configuration information using a CompactFlash card
The following explains how to restore device configuration information that has been saved to a CompactFlash card.
1. Insert the CompactFlash card containing the configuration information into the device's
CompactFlash card slot.
2. Restore configuration information from the CompactFlash card.
Example
The following example restores configuration information 2 from the config2-1 file.
# copy /cf0/config2-1 config2
# reset
Be sure to restart the device to so that the restored configuration information can take effect.
Note
6.2.3 Saving/restoring configuration information using USB
memory
Available Model
You can save the device's configuration information on USB memory. If necessary, you can also restore the configuration
information saved on USB memory.
Configuration information which can be saved
• Candidate configuration
• Running configuration
• Configuration information 1
• Configuration information 2
The following explains how to save/restore configuration information using USB memory.
Saving configuration information using USB memory
The following explains how to save the configuration information of this device to USB memory.
1. Insert USB memory on which you will save the configuration information into the USB port of the
device.
2. Release the block status of the USB port.
# usbctl enable
3. Confirm that the block status of the USB port has been released.
Run a show usb hcd status command and ensure that the status displays "enable".
# show usb hcd status
[USB HCD STATUS]
status : enable
: Restart the device.
XG0448 / XG0440DC / XG0440DCR / XG2600
: candidate-config
: running-config
: config1
: config2
584
Chapter 6 Managing the Device
Saving/Restoring Configuration Information