Linkaggregation Downrelay Recovery Cause - Fujitsu XG0224 User Manual

XG Series User's Guide
Default

5.1.1.28 linkaggregation downrelay recovery cause

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
It is assumed that "manual" was specified for releasing the offline state operation of the
linked port list.
linkaggregation <group> downrelay recovery mode manual
Set the target parameters for offline state release in the Linkdown Relay function of the
linkaggregation.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
linkaggregation <group> downrelay recovery cause <cause>
<group>
• Link aggregation group number
Set a link aggregation group number with a decimal number.
Range
1 to 13 XG0224
1 to 26 XG0448
1 to 22 XG0440DC / XG0440DCR
1 to 10 XG2600
<cause>
Specify the offline parameters targeted to offline state release of the linked port from the
following.
• downrelay
Specify when offline parameters by the Linkdown Relay function are targeted for
release.
• all
Release offline state of all parameters.
Configuration mode (admin class)
Set the offline parameters lead by linkup assigned for releasing the offline state when
"auto" is specified in the "ether downrelay recovery" command.
• This command is enabled only when "auto" is set for offline state release operation
("ether downrelay recovery mode"
The definition is ignored when "manual" is specified.
• The offline state is released independent of this command definition when the
command in the linked port is executed, or during dynamic definition change
accompanied by releasing the offline state.
It is assumed that "downrelay" was specified as the target parameters for offline state
release of the linked port list.
linkaggregation <group> downrelay recovery cause downrelay
command) lead by linkup.
119
Chapter 5 Command Reference
Model
Port Information Settings
"online"