XG Series User's Guide
5.12 ACL Information Settings
This section explains about ACL information settings.
5.12.1
ACL Information
This section explains about the commands related to ACL information.
Specifying range for ACL definition number
Model
XG0224 / XG0448 /
XG0440DC / XG0440DCR
XG2600
5.12.1.1 acl mac
Function
Available Model
Syntax
Options
Specify a range between 0 to 799 for ACL definition number (in a decimal number) to specify
"acl_count" written in the [Option] in command in this section.
Specify a range between 0 to 299 for ACL definition number (in a decimal number) to specify
"acl_count" written in the [Option] in command in this section.
Set the definition of the ACL MAC.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
acl <acl_count> mac <src_mac> <dst_mac> llc <value>
acl <acl_count> mac <src_mac> <dst_mac> ether <value>
acl <acl_count> mac <src_mac> <dst_mac> any
<acl_count>
• ACL definition number
Specify an ACL definition serial number with a decimal value.
<src_mac>
Specify the source MAC address for ACL.
• any
Specify it when targeting all MAC addresses.
• bcast
Specify it when targeting a broadcast MAC address.
• mcast
Specify it when targeting a multicast MAC address.
• Other than those above
Specify the target MAC address. Specify the source MAC address for ACL in the
xx:xx:xx:xx:xx:xx format, where "xx" is a 2-digit hexadecimal value.
<dst_mac>
Specify the destination MAC address for ACL.
• any
Specify it when targeting all MAC addresses.
• bcast
Specify it when targeting a broadcast MAC address.
• mcast
Specify it when targeting a multicast MAC address.
ACL definition number
238
Chapter 5 Command Reference
ACL Information Settings