Ipv6 Packet Statistics Display Commands; Show Ipv6 Traffic - Fujitsu XG0224 User Manual

XG Series User's Guide
5.27.3

IPv6 Packet Statistics Display Commands

This section explains the commands related to IPv6 packet statistics display.

5.27.3.1 show ipv6 traffic

Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Display IPv6 packets statistics information
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
show ipv6 traffic
show ipv6 traffic { tcp | udp | ip | icmp }
N/A
Display all the IPv6 statistics information
tcp
Display TCP packets statistics information
udp
Display UDP packets statistics information
ip
Display IPv6 packets statistics information
icmp
Display ICMP packets statistics information
Operation mode (user class/admin class)
Configuration mode (admin class)
Display IPv6 packets statistics information
# show ipv6 traffic
tcp6:
0 packets sent
0 data packets (0 bytes)
0 data packets (0 bytes) retransmitted
0 ack-only packets (0 delayed)
0 URG only packets
0 window probe packets
0 window update packets
0 control packets
0 packets received
0 acks (for 0 bytes)
0 duplicate acks
0 acks for unsent data
0 packets (0 bytes) received in-sequence
0 completely duplicate packets (0 bytes)
0 old duplicate packets
0 packets with some dup. data (0 bytes duped)
0 out-of-order packets (0 bytes)
0 packets (0 bytes) of data after window
0 window probes
0 window update packets
0 packets received after close
0 discarded for bad checksums
0 discarded for bad header offset fields
0 discarded because packet too short
(To be continued)
463
Packet Statistics Display and Clear Operation Commands
Chapter 5 Command Reference