XG Series User's Guide
5.15.1.5 snmp agent address
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
5.15.1.6 snmp agent engineid
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the SNMP agent address.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
snmp agent address <address>
<address>
• Agent address
Set the agent address of this device.
Specifying 0.0.0.0 will delete the SNMP agent address.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Configuration mode (admin class)
Set the SNMP agent address. This setting is also used for the local address at trap
transmission.
Make sure to set it when using the SNMP agent function.
It is assumed that the agent address is not set. The local IP address of trap packet is
undefined.
Set a SNMP engine ID name.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
snmp agent engineid <engineID>
<engineID>
• SNMP engine ID
Specify a SNMP engine ID with up to 27 characters.
Configuration mode (admin class)
Set a SNMP engine ID under SNMPv3. In this device, the SNMP engine ID is as follows.
• When setting this command;
Octets 1 to 5: 0x800000d304 fixed
Octet 6 and above: Engine ID set in this command
• When not setting this command;
Octets 1 to 5: 0x800000d304 fixed
Octet 6 and above: Random value
A SNMP engine ID is generated automatically.
269
Chapter 5 Command Reference
Device Information Settings