M1 Port Status Display Command; Show Oob - Fujitsu XG0224 User Manual

XG Series User's Guide

5.23 M1 port Status Display command

This section explains the commands related to oob.
5.23.1 M1 port Status Display command
This section explains the commands related to M1 port Status Display command.

5.23.1.1 show oob

Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Display of M1 port information
XG2600
show oob
N/A
Operation mode (user class/admin class)
Configuration mode (admin class)
M1 port information is displayed.
#show oob
IP Address : 192.168.3.1
Subnet Mask : 255.255.255.0
IPv6 Address : fe80::217:42ff:fed1:a80/64
MAC Address : 00:17:42:d1:0a:80
#
1) The IPv4 address in the M1 port is displayed.
2) The subnet mask in the IPv4 address in the M1 port is displayed.
3) The IPv6 address in the M1 port is displayed. When IPv6 is not used, it is not
displayed.
4) The MAC address in the M1 port is displayed.
---(1)
---(2)
---(3)
---(4)
439
Chapter 5 Command Reference
M1 port Status Display command