Terminal Window; Terminal Charset - Fujitsu XG0224 User Manual

XG Series User's Guide

5.17.2.2 terminal window

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default

5.17.2.3 terminal charset

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the terminal screen size.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
terminal window [column <column>] [line <line>]
column <column>
Specify the number of digits of the terminal screen with a decimal value.
line <line>
Specify the number of lines of the terminal screen with a decimal value.
Operation mode (user class/admin class)
Configuration mode (admin class)
Specify the screen size of the terminal.
For telnet or ssh connection, the screen size of the terminal reported from a telnet or ssh
client is used at connection or changing the screen size.
If the screen size is changed after reported, this setting value will be used.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
Specifying incorrect screen size may cause a display distortion when a command is input
or executed.
It is assumed that the screen size of the terminal is set to 80 columns x 24 lines.
terminal window column 80 line 24
Set the Japanese Kanji character codes.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
terminal charset {EUC|SJIS}
EUC
Use the EUC Japanese Kanji character codes on the terminal.
SJIS
Use the Shift-JIS Japanese Kanji character codes on the terminal.
Operation mode (user class/admin class)
Configuration mode (admin class)
Specify the Japanese Kanji character codes to be used on the terminal.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
It is assumed that the EUC Japanese Kanji character codes are used on the terminal.
terminal charset EUC
"delete" command in the configuration mode.
"delete" command in the configuration mode.
346
Chapter 5 Command Reference
"save" command. This
"admin"
"save" command. This
"admin"
Mode and Terminal Operation Commands