Fujitsu XG0224 User Manual page 342

XG Series User's Guide
5.17.1.9 !
Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Return to the previous class, mode or configuration directory.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
!
N/A
Operation mode (admin class)
Configuration mode (admin class)
In the operation mode, the Use Mode class returns to the user class if it has been
switched from the user class to the admin class using the
the operation mode still remains unchanged without logout.
In the configuration mode, the current directory will be moved up to the next higher one
when the configuration directory function is enabled in a directory other than the top
directory. Otherwise, if the configuration has not been changed, the configuration mode
returns to the operation mode, but if the configuration has been changed, the
configuration mode still remains unreturned with an error message.
For the configuration directory function, refer to the
This command is almost the same as for the
occur in the operation mode.
# configure
(config)# !
# !
#
"5.17.1.4 configure", p.
"exit" command except that logout does not
(Switch to the configuration mode)
(Return to the operation mode)
(Still remain without logout)
342
Chapter 5 Command Reference
"admin" command. Otherwise
339.
Mode and Terminal Operation Commands