Linkaggregation Icmpwatch Interval - Fujitsu XG0224 User Manual

Hide thumbs Also See for XG0224:
Table of Contents

Advertisement

XG Series User's Guide

5.1.1.25 linkaggregation icmpwatch interval

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set various types of "ether" L3 monitoring intervals for link aggregation.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
linkaggregation <group> icmpwatch interval <interval> <timeout> [<retry>]
<group>
• Link aggregation group number
Set a link aggregation group number with a decimal number.
Range
1 to 13
XG0224
1 to 26
XG0448
1 to 22
XG0440DC / XG0440DCR
1 to 10
XG2600
<interval>
• Transmission interval of normal ICMP ECHO packets
Specify the transmission interval of normal ICMP ECHO packets to be within the range
of 1 to 60 seconds (or 1 minute).
The unit shall be m (minute) or s (second).
<timeout>
• Monitoring timeout
Specify the monitoring timeout period as between 5 to 180 seconds (or 3 minutes). If
the time exceeds, this monitoring is considered as failed.
The unit should be in m (minute) or s (second).
<retry>
• Retransmission interval of ICMP ECHO packets
Specify the retransmission interval of ICMP ECHO packets between 1 to <timeout>-1
seconds if the normal ICMP ECHO packet transmission is not acknowledged.
The unit should be in m (minute) or s (second).
The default is 1s.
Configuration mode (admin class)
Set the operation information for destination monitoring.
The destination is monitored in the interval specified by <interval> while the response to
ICMP ECHO packet is being received normally. If the response to ICMP ECHO packet is
not received, the packet transmission is repeated at the intervals specified in <retry>. If
no response is returned within the time period specified by <timeout>, a communication
failure is assumed and an abnormal detection is reported. Accordingly, all the member
ports specified in <group> are offline.
If ports are offline, release them by the
It is assumed that the 10-second transmission interval during normal communication, the
5-second timeout for monitoring, and the 1-second retransmission interval have been
specified.
linkaggregation <group> icmpwatch interval 10s 5s 1s
"online"
command.
116
Chapter 5 Command Reference
Model
Port Information Settings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg0448Xg2600Xg0440dcXg0440dcr

Table of Contents