Ether Mode - Fujitsu XG0224 User Manual

XG Series User's Guide
5.1.1.4

ether mode

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the link speed.
XG0224 / XG0448 / XG0440DC / XG0440DCR
ether <number> mode <speed>
<number>
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
Range
1 to 24 XG0224
1 to 48 XG0448
1 to 40 XG0440DC / XG0440DCR
<speed>
Link speed
• auto
Determine the link speed through auto negotiation.
• 1000
Set the 1Gbps fixed link speed.
• 100
Set the 100Mbps fixed link speed.
• 10
Set the 10Mbps fixed link speed.
Configuration mode (admin class)
Set the link speed at the Ethernet port.
Use the 100Mbps fixed link speed setting if using the 100BASE-FX module.
It is assumed that Auto Negotiation mode has been specified.
ether <number> mode auto
Model
93
Chapter 5 Command Reference
Port Information Settings