Table of Contents
Advertisement
8.
Management
User Accounts Settings
This window is used to create and configure the user accounts. The active user account sessions can be viewed.
There are two user account privilege available, User and Administrator:
User - This user account level has the lower priority of the user accounts. The purpose of this type of user
account level is for basic system checking.
Administrator - This administrator user account level can monitor all system information and change any of the
system configuration settings expressed in this guide.
The fields that can be configured are described below:
User Name: Enter the user account name here. This name can be up to 32 characters long.
Privilege: Select the privilege level for this account.
Password Type: Select the password type for this user account here. Options to choose from are None and Plain
Text.
Password: After selecting Plain Text as the Password Type, enter the password for this user account here.
Click Apply to accept the changes made.
Click Delete to remove the specified entry.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
After clicking the Session Table tab, the following window will appear.
A list of active user account session will be displayed.
SNMP
SNMP Global Settings
This window is used to configure the SNMP global settings and trap settings.
SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Figure 8-1 User Accounts Settings (User Management Settings)
Figure 8-2 User Accounts Settings (Session Table)
24
Advertisement
Table of Contents
