Default Roles; Methods For Setting The Ip Address - Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

3

Default roles

•
•

Default roles

Attributes of default roles cannot be modified; however, the default roles can be assigned to
non-default user accounts. The following roles are default roles:
•
•

Methods for setting the IP address

You can configure the Brocade 6545 16 Gbps FC Switch Module with a static IP address, or you
can use a Dynamic Host Configuration Protocol (DHCP) server to set the IP address of the Switch
Module. DHCP is enabled by default. The Switch Module supports IPv4 format addresses.
Default IP address parameters are stored on the Switch Module. You can reset the IP address from
its default setting using one of the following methods:
•
•
22
Brocade-branded SFP+ optical transceivers and compatible fiber-optic or twinax cables, as
required.
Access to these publications:
-
PRIMERGY BX900 S2 Blade Server System Unit Operating Manual
-
PRIMERGY BX900 S2 System Unit Upgrade and Maintenance Manual
-
PRIMERGY BX900 Blade Server Systems ServerView Management Blade S2 User
interface Description
-
PRIMERGY BX400 S1 Blade Server System Unit Operating Manual
-
PRIMERGY BX400 S1 System Unit Options Guide
-
PRIMERGY BX400 Blade Server Systems ServerView Management Blade S1 User
interface Description
-
Brocade Fabric OS Command Reference
-
Brocade Fabric OS Administrator's Guide
-
Brocade Web Tools Administrator's Guide
You can access Fujitsu support documentation by accessing http://manuals.ts.fujitsu.com/
For the Japanese market, you can access Fujitsu support documentation by accessing
http://jp.fujitsu.com/platform/server/primergy/manual/
The admin role has the highest privileges. All CLIs are accessible to the user associated with
the admin role. By default, the admin role has read and write access.
The user role has limited privileges that are mostly restricted to show commands in the
Privileged EXEC mode. User accounts associated with the user role cannot access
configuration CLIs that are in the global configuration mode. By default, the user role has
read-only access.
Using the PRIMERGY BX MMB CLI.
Establishing a serial connection.
Brocade Gen5 6545 16-Gbps FC Switch Module Hardware Reference Manual
53-1003184-01