XG0440DC/XG0440DCR Hardware Guide
2.6
Set up IP address
Please set the IP address at times when it is required.
Eg. When setting the switch through www browser or installing a firmware from the initial state of the purchase.
The following commands show how to set up the IP address (ex. 192.168.1.1)
Command
XG0440# configure
XG0440DC(config)# lan 0 ip address 192.168.1.1/24 3
XG0440DC(config)# lan 0 vlan 1
XG0440DC(config)# commit
XG0440DC(config)# exit
XG0440DC#
Precautions
The IP address is not set at the initial state of the purchase. Please set the IP address through a console session.
42
Chapter 2 Installation
Set up IP address