Accessing The Embedded Web Server; Basic Control Protocol Parameters; Figure 3-2: Embedded Web Server Login Screen - AudioCodes MediaPack MP-11 Series Fast Track Manual
Analog media gateways
Hide thumbs
Also See for MediaPack MP-11 Series:
- Troubleshooting manual (80 pages) ,
- Installation manual (58 pages) ,
- User manual (504 pages)
Table of Contents
Advertisement
3.3
Accessing the Embedded Web Server
To access the Embedded Web Server, take these 4 steps:
Open a standard Web-browsing application such as Microsoft™ Internet Explorer™ (Version
1.
6.0 and higher) or Netscape™ Navigator™ (Version 7.2 and higher).
In the URL field, specify the IP address of the MediaPack (e.g., http://10.1.10.10); the
2.
Embedded Web Server's 'Enter Network Password' screen appears, shown in
In the 'User Name' and 'Password' fields, enter the username (default: "Admin") and
3.
password (default: "Admin"). Note that the username and password are case-sensitive.
Click OK; the 'Quick Setup' screen is accessed, shown in
4.
(H.323), and
3.4
Basic Control Protocol Parameters
To configure the MediaPack basic control protocol parameters use the Embedded Web Server's
'Quick Setup' screen.
•
For MGCP refer to Section
•
For H.323, refer to Section
•
For SIP, refer to Section
When you have completed the above relevant section you are then ready to start using the
MediaPack. For information on how to fully configure the VoIP gateway, refer to the MediaPack
User's Manuals.
Tip:
Note:
Analog Fast Track Guide
Figure 3-2: Embedded Web Server Login Screen
Figure 3-5
(SIP).
3.4.1
on page
3.4.2
on page
3.4.3
on page
Once the gateway is configured correctly, back up your settings by making a
copy of the VoIP gateway configuration (ini file) and store it in a directory on
your PC. This saved file can be used to restore configuration settings at a
future time. For information on backing up and restoring the gateway's
configuration refer to Section
The following configuring Sections from here up to and including Section
3.4.3
on page
22
apply individually to MGCP, H.323, or SIP.
MGCP configuring continues with Section
H.323 configuring continues with Section
SIP configuring continues with Section
18
Figure 3-3
18.
20.
22.
5
on page 26.
3.4.1
on page 18.
3.4.2
on page 20.
3.4.3
on page 22.
MediaPack
Figure 3-2.
(MGCP),
Figure 3-4
Document #: LTRT-59802
Advertisement
Table of Contents
