D Setting The Gps Alarm - Icom ID-5100A Full Manual

Previous view
8
GPS OPERATION
Adding or editing GPS memory (Continued)

D Setting the GPS alarm

A GPS alarm can sound when a target position comes
into the alarm area.
This function can be set to the caller station, all GPS
Memory channels, a specified Memory group or a
specified Memory channel.
Alarm area 1 (Setting plural stations)
When all channels or group is selected:
Point A
0.25'
Your
position
Point B
Example: Set the alarm setting to all GPS memory (All
Memories).
Touch [MENU].
q
Touch "GPS Alarm."
w
(GPS > GPS Alarm)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch "Alarm Select."
e
Touch "Group."
r
For your reference:
When "All Memories", "A" to "Z" or "(No Group)" is se-
lected, the alarm sounds depend on the "Alarm Area
(Group)" setting in the Set mode.
(GPS > GPS Alarm > Alarm Area (Group))
N
0.25'
Point C
Beeps three times
Alarm area 2 (Setting specific station)
When a specified memory is selected:
Your
position
Beeps one times
Touch "All Memories."
t
• If you want to set the alarm to a GPS memory group,
touch "(No Group)" or "A" to "Z."
Touch [MENU].
y
• Closes the Menu screen, and "ì" appears on the
screen.
• When either one of the stations in a specified group en-
ters the set range, the beep sounds three times.
• To cancel the GPS alarm, select "OFF" in the step r.
• When the GPS alarm sounds, "GPS ALARM" pops up on
the screen and then "ì" blinks.
GPS alarm sounds, and
"GPS ALARM" pops up.
8-36
Extended range
(approx. 1 km; 1094 Y)
Limited range
(approx. 500 m; 547 Y)
Beeps three times
"All Memories" is
displayed
Blinks