Power Save; One-Touch Ptt; Ptt Beep - Icom ID-5100A Full Manual

Previous view
12
MENU SCREEN
Bluetooth Set items (Continued)

Power Save

Bluetooth Set > Headset Set > Icom Headset >
Power Save
Select whether or not to operate with the power save
mode while the optional VS-3
connected.
When a third-party headset or a data device is con-
nected, the power save mode is automatically turned
OFF, regardless of this setting.
• OFF: Turns OFF the function.
• ON: The Power Save mode is enabled when no com-
munication or operation is performed for 120
seconds.

One-Touch PTT

Bluetooth Set > Headset Set > Icom Headset >
One-Touch PTT
Set the One-Touch PTT function while the optional
®
VS-3
Bluetooth
headset
The function enables you to transmit without continu-
ously holding down [PTT].
When a third-party headset is connected, this func-
tion is automatically turned ON, regardless of this
setting.
• OFF: Transmits while holding down [PTT].
• ON: Pushing [PTT] toggles transmission and recep-
tion.

PTT Beep

Bluetooth Set > Headset Set > Icom Headset >
PTT Beep
Set the beep sound when you push [PTT] on the op-
®
tional VS-3
Bluetooth
headset
• OFF: No beep sounds.
• ON: A beep sounds.
Custom Key Beep
Bluetooth Set > Headset Set > Icom Headset >
Custom Key Beep
Set the beep sound when you push the Custom Key
([PLAY]/[FWD]/[RWD]) on the optional VS-3
.
headset
• OFF: No beep sounds.
• ON: A beep sounds.
(Default: OFF)
®
Bluetooth
headset
(Default: OFF)
is connected.
(Default: OFF)
.
(Default: OFF)
Bluetooth
Custom Key
(Default: [PLAY]: ---, [FWD]: UP, [RWD]: DOWN)
Bluetooth Set > Headset Set > Icom Headset >
Custom Key
is
Assigns the following key functions to the Custom Key
([PLAY]/[FWD]/[RWD]) on the optional VS-3
.
headset
Function
--- No function
Push to increase the frequency, Memory
UP channel, repeater or select the next station
call sign.
Push to decrease the frequency, Memory
DOWN channel, repeater or select the previous sta-
tion call sign.
VOL UP Push to turn up the volume level.
VOL DOWN Push to turn down the volume level.
SQL UP Push to turn up the squelch level.
SQL DOWN Push to turn down the squelch level.
Monitor Push to open or close the squelch.
CALL Push to select a call channel.
In the Memory mode, push to select Memo-
MR (000 CH)
ry channel 000.
In the Memory mode, push to select Memo-
MR (001 CH)
ry channel 001.
Push to toggle between the VFO mode and
VFO/MR
the Memory mode.
DR Push to turn the DR function ON or OFF.
In the DR screen, push to toggle between
FROM/TO (DR)
"FROM" and "TO."
Push to directly select the Home CH that is
set to the selected mode (VFO/Memory) or
DR screen.
HOME CH
While in the CALL CH or weather channel
mode, or when no Home CH is set, an error
beep sounds.
Push to select an operating band.
In the VFO mode, push to change the oper-
BAND/BANK ating band, and in the Memory Bank mode,
push to select a bank (OFF or A to Z).
• Only the programmed bank appears.
Push to start the scan.
SCAN
While scanning, push to stop the scan.
Push to set the frequency to be skipped dur-
Temporary ing scanning.
Skip The selected frequencies are temporarily
skipped for faster scanning.
Hold down for 1 second to set the last call-
RX>CS
ing station call sign to "TO" (destination).
®
12-65
Bluetooth
Description
Continued on the next page.
☞
®