Specifications; D General - Icom ID-5100A Full Manual

Previous view
16
SPECIFICATIONS AND OPTIONS

Specifications

D General

• Frequency coverage:
• Mode:
• No. of memory channels:
• No. of program scan channels: 25 channels (2 edge frequencies in each channel)
• No. of call channels:
• Antenna connector:
• Antenna impedance:
• Usable temperature range:
• Frequency stability:
• Digital transmission speed:
• Voice coding speed:
• Frequency resolution:
• Power supply:
• Current drain:
Transmit
Maximum current drain: ≤ 10.5 A (TPE version)
Receive
Standby:
Maximum audio:
• Dimensions (projections not included):
Main unit:
Controller:
• Weight (approximately):
Main unit:
Controller:
All stated specifications are typical and subject to change without notice or obligation.
RX 118–174 MHz*
EUR
TX 144–146 MHz, 430–440 MHz
RX 118–136.99166 MHz*
ITR
TX 144–146 MHz, 430–434 MHz, 435–438 MHz
RX 144–146 MHz, 430–432 MHz
TPE
TX 144–146 MHz, 430–432 MHz
RX 118–174 MHz*
USA
TX 144–148 MHz, 430–450 MHz*
RX 144–146 MHz, 430–440 MHz
KOR
TX 144–146 MHz, 430–440 MHz
RX 118–174 MHz*
EXP
TX 137–174 MHz*
1
* Guaranteed only 144–146 MHz, *
4
* Guaranteed only 144–148 MHz, *
F2D/F3E (FM/FM-N), F7W (DV), A3E (AM/AM-N) RX only
1000 channels
4 channels (2 channels × 2 bands)
SO-239
50 ø
–10˚C to +60˚C; +14˚F to +140˚F
±2.5 ppm (–10˚C to +60˚C; +14˚F to +140˚F)
4.8 kbps
2.4 kbps
5 kHz, 6.25 kHz, 8.33 kHz, 10 kHz, 12.5 kHz, 15 kHz, 20 kHz, 25 kHz, 30 kHz, 50 kHz
The 8.33 kHz step is not selectable, depending on the operating band or mode.
13.8 V DC ±15% (negative ground)
≤ 13.0 A (Other versions)
≤ 1.2 A
≤ 1.8 A
150(W) × 40(H) × 172.6(D) mm; 5.9(W) × 1.6(H) × 6.8(D) inch
182.2(W) × 24.8(H) × 81.5(D) mm; 7.2(W) × 1.0(H) × 3.2(D) inch
1.3 kg; 2.9 lb
260 g; 9.2 oz
16-2
1 , 375–550 MHz* 2
3 , 144–146 MHz, 430–434 MHz, 435–438 MHz
4 , 375–550 MHz* 5
5
4 2
, 375–550 MHz*
4 , 400–470 MHz* 2
2
Guaranteed only 430–440 MHz, *
5
Guaranteed only 440–450 MHz
3
Not guaranteed,