Altitude - Icom ID-5100A Full Manual

Previous view
8
GPS OPERATION
Transmitting D-PRS data
D
Setting D-PRS Position (Mobile/Base) (Continued)
6. Entering a comment
Enter a comment, and transmit it with the D-PRS posi-
tion data.
The number of characters you can enter differs, de-
pending on the data extension and altitude settings.
(See to the right.)
Data Extension
OFF
OFF
Course/Speed
Course/Speed
Power/Height/Gain/Directivity
Power/Height/Gain/Directivity
!2 Touch "Comment."
!3 Touch the desired comment field for 1 second.
!4 Touch "Edit."
• Opens the "Comment" screen.
!5 Touch the keypad.
• Enters the desired character or symbol.
• In the Alphabet entry mode, touch "" to enter an upper
case letter once, or touch " " to continuously enter upper
case letters. Touch " " to enter lower case letters.
• Touch [[ab]] or [[12]], and then touch [ab], [12] or [(!"#)] to
select the desired entry mode.
• Touch "ab⇔12" to toggle between the Alphabet entry and
Number entry modes.
• Touch "SPACE" to enter a space.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch [QUICK], and then touch "Switch to Tenkey" to
switch the keyboard type.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! " # $ % & ' ( ) * + ,
- . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
• The symbol " " shows the transmittable comment range.
Please note that the characters that exceed the range will
not be transmitted.
!6 Touch [] to move the cursor backwards, or touch
[] to move the cursor forwards.
!7 Repeat steps !5 and !6 to enter a comment, includ-
ing spaces.
!8 After entering, touch [ENT].
!9 Touch [](D to return to the previous screen.
Characters

Altitude

entered (Max.)
43 (Default)
OFF
35
ON
36
OFF
28
ON
36
OFF
28
ON
7. Setting the Time Stamp
Set the time stamp function to transmit the received
time data in UTC (Universal Time Coordinated) time.
@0 Touch "Time Stamp."
@1 Touch the desired time stamp.
• OFF: Does not transmit the time information.
• DHM:Transmits the time stamp in the Day, Hour,
and Minute format.
• HMS: Transmits the time stamp in the Hour, Minute,
and Second format.
@2 Touch [√] to select the next page.
8. Setting the Altitude
Set the altitude data transmission.
@3 Touch "Altitude
."
@4 Touch "ON."
NOTE:
If you transmit with the altitude setting ON, the char-
acter string is included in a comment on the products
that cannot display the altitude. (IC-9100, IC-80AD,
IC-E80D, ID-880H, ID-E880, IC-92AD, IC-E92D, IC-
U82, IC-V82)
9. Setting the Data Extension
Set the data extension of your station's information.
@5 Touch "Data Extension."
@6 Touch the desired option to transmit.
• OFF:
• Course/Speed:Transmits the course and speed
• Power/Height/Gain/Directivity:
10. Setting the TX power
This item appears when "9. Setting Data Extension"
is set to "Power/Height/Gain/Directivity."
Select the TX power level of the base station, to trans-
mit in addition to the position data.
@7 Touch "Data Extension."
@8 Touch the desired option between 0, 1, 4, 9, 16, 25,
36, 49, 64, and 81W.
8-18
Does not transmit any information.
data in addition to the position data.
Transmits the TX power level,
height, antenna gain and antenna
direction, in addition to the position
data.
Continued on the next page.
☞