Dr Scan And A Priority Channel - Icom ID-5100A Full Manual

Previous view
5
PRIORITY WATCH

DR scan and a priority channel

Checks the selected priority channel every 5 seconds,
during a DR scan.
1. Set the priority channel
• To select a VFO frequency
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [VFO].
e Set the receive frequency and mode.
• To select a Memory channel
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [MR].
e Rotate [DIAL] to select the Memory channel you
want to watch.
• To select a Bank channel
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [MR].
e Rotate [DIAL] to select the Bank channel you
want to watch.
How to select the Memory and Bank:
z In the Memory mode, touch [QUICK].
x Touch "Bank Select."
• The Bank list is displayed.
c Touch a desired bank.
• If "OFF" is selected, cancel the bank selection.
• To select a Call channel
q Touch the Memory channel number.
• Opens the Mode setting window.
w Touch [CALL].
e Rotate [DIAL] to select the Call channel you want
to watch.
2. Start the DR scan
q Touch [DR].
• Turns ON the DR function.
w Touch [SCAN].
• Open the scan type setting window.
e Touch the desired scan type.
• The DR scan starts.
Blinks
5-16
Continued on the next page.
☞