Dv Memory Items - Icom ID-5100A Full Manual

Previous view
12
MENU SCREEN

DV Memory items

Your Call Sign
DV Memory > Your Call Sign
The transceiver has a total of 200 memories to store an
individual station destination call sign.
The stored call sign and name are displayed on the
"YOUR CALL SIGN" or "RX HISTORY" screen.
• The Your (UR) Call Sign can be programmed to the
memory using the RX History. (p. 6-26)
• See pages 7-32 to 7-35 about how to add, edit or
move the Your Call Sign in the memory.
Repeater List
DV Memory > Repeater List
You can store repeater information for quick and simple
communication when using repeaters.
The transceiver has a total of 1200 repeater memory
channels, storable in 30 groups (01 to 30).
NOTE:
For easy operation, a repeater list is preloaded into
your transceiver. However, if the CPU clears all pro-
grammed contents (All Reset), the repeater list is
also cleared.
We recommend that memory data be backed up us-
ing an SD card, or be saved to a PC using the CS-
5100 cloning software.
About the repeater list:
The repeater list can be downloaded from the Icom
website.
http://www.icom.co.jp/world/support/download/firm/in-
dex.html
Repeater Group (01 to 30)
Repeater group name of up to 16 alpha-
Group name
numeric characters
The Skip setting can be turned ON or OFF in the Quick Menu
screen.
Repeater List
<DV Repeater>
TYPE DV Repeater
Repeater name of up to 16 alphanumer-
NAME
ic characters
Repeater sub name of up to 8 alphanu-
SUB NAME
meric characters
CALL SIGN Repeater call sign
GW CALL SIGN Gateway call sign
Repeater group where the repeater is
GROUP
assigned
Select whether or not to use the repeat-
USE(FROM) er as an access repeater (FROM) in the
DR screen
Operating frequency of the access re-
FREQUENCY
peater
Duplex setting to use the access re-
DUP
peater
Frequency offset to use the access re-
OFFSET FREQ
peater
Position data accuracy level ("None,"
POSITION
"Approximate" or "Exact")
LATITUDE* Latitude position of the repeater
LONGITUDE* Longitude position of the repeater
Time difference between UTC (Universal
UTC OFFSET
Time Coordinated) and the local time
NOTE: When the repeater is used for a simplex com-
munication, refer to the list below to set the set-
tings.
<DV Simplex>
TYPE DV Simplex
Enter the desired name of up to 16 al-
NAME
phanumeric characters
Enter the desired sub name of up to 8
SUB NAME
alphanumeric characters
GROUP Set the desired repeater group
Select whether or not to use the repeat-
USE(FROM) er as an access repeater (FROM) in the
DR screen
FREQUENCY Frequency to operate simplex
Position data accuracy level ("None,"
POSITION
"Approximate" or "Exact")
LATITUDE* Latitude position of the access point
LONGITUDE* Longitude position of the access point
Time difference between UTC (Universal
UTC OFFSET
Time Coordinated) and the local time
* Appears when POSITION is set to "Approximate" or "Ex-
act."
12-41