Sounds Items; Beep Level; Sub Band Mute - Icom ID-5100A Full Manual

Previous view
12
MENU SCREEN

Sounds items

Beep Level

Sounds > Beep Level
Set the beep audio output level to between 0 (OFF), 1
(minimum) and 9 (maximum).
Key-Touch Beep
Sounds > Key-Touch Beep
Turn the confirmation beep tones ON or OFF.
• OFF: No beep sounds.
• ON: A beep sounds when you touch a screen.
Home CH Beep
Sounds > Home CH beep
Turn the Home CH Beep ON or OFF.
• OFF: No beep sounds.
• ON: Sounds a beep when you select the Home CH
by rotating [DIAL].
NOTE: You can set a Home CH for the VFO mode,
Memory mode and the DR function. (p. 2-16)
Band Edge Beep
Sounds > Band Edge Beep
Turn the Band edge beep ON or OFF.
• OFF: No beep sounds.
• ON: A beep sounds when you tune into or out of the
AIR, VHF and UHF band's frequency range by
rotating [DIAL].
Scan Stop Beep
Sounds > Scan Stop Beep
Turn the scan stop beep ON or OFF.
• OFF: No beep sounds.
• ON: A beep sounds when a scan stops by receiving
a signal.
Standby Beep
(Default: 9)
Sounds > Standby Beep
Turn the standby beep function ON or OFF.
This function sounds a beep after a received signal dis-
appears, in the DV mode.
• OFF: Turns OFF the function.
(Default: ON)
• ON: Sounds a beep after a received signal disap-
• ON (to me: High Tone):
(Default: ON)

Sub Band Mute

Sounds > Sub Band Mute
Select whether or not to mute the SUB band audio sig-
nal while receiving on the MAIN band, and/or sound a
beep when a signal disappears on the SUB band.
(Default: OFF)
• OFF:
• Mute:
• Beep:
• Mute & Beep: While receiving on the MAIN band, the
(Default: OFF)
Scope AF Output
Sounds > Scope AF Output
Select the audio output option during a sweep by the
Band Scope function.
• OFF: No audio is heard during the sweep.
• ON: Audio is heard during the sweep.
12-61
(Default: ON (to me: High Tone))
pears.
Sounds a beep after a received signal disap-
pears.
If the signal is addressed to your call sign, a
higher tone beep sounds.
• The standby beep sounds even when the "Key-
touch beep" is set to "OFF."
• You can set the standby beep output level with the
"Beep level" item.
Disables the SUB band mute function.
While receiving on the MAIN band, the
SUB band audio signal is muted.
When a signal disappears on the SUB
band, a beep sounds.
The beep sounds even if no signal is
received on the MAIN band.
SUB band audio signal is muted.
While receiving on the SUB band, and
a signal disappears, a beep sounds.
- The beep sounds even if no signal is re-
ceived on the MAIN band.
• Only when the dual watch mode is selected.
(Default: OFF)
(Default: ON)