Automatic Reply Function - Icom ID-5100A Full Manual

Previous view
7
D-STAR OPERATION <ADVANCED>

Automatic Reply function

When a call addressed to your own call sign is received,
the Automatic Reply function automatically replies with
your call sign. (Default: OFF)
Depending on the setting, a recorded message may be
transmitted with the call sign.
Touch [MENU].
q
Touch "Auto Reply."
w
(DV Set > Auto Reply)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch the desired option.
e
• ON: Replies with your own call sign. (No audio
reply is sent)
• Voice: Replies with your call sign and any Auto Re-
ply message recorded on the SD (up to 10
seconds).
If no SD card is inserted, or no message is
recorded, replies with your own call sign. (No
audio reply is sent)
• Position (Main Only):
Replies with your own call sign and trans-
mits your position using the internal GPS
receiver.
While in the Dualwatch mode, automatically
replies only when the signal is received in
the MAIN band.
- When the "GPS Select" item is set to "OFF" or
"Manual," the internal GPS receiver is temporar-
ily turned ON.
• Position (Main/Sub):
Replies with your own call sign and trans-
mits your position using the internal GPS
receiver.
While in the Dualwatch mode, automatically
replies when the signal is received in either
the Main or Sub band.
- When the "GPS Select" item is set to "OFF" or
"Manual," the internal GPS receiver is temporar-
ily turned ON.
Touch [MENU].
r
• Closes the Menu screen.
• " " appears.
Appears
When "ON" or "Voice" is selected, the Automatic Re-
ply function is automatically turned OFF, when you
push [PTT]. When "Position (Main Only)" or "Position
(Main/Sub)" is selected, the Automatic Reply func-
tion remains ON, when you push [PTT].
After receiving a call from "JM1ZLK," the transceiver
automatically sends a reply call.
The "TO" setting does not change, but "UR:
JM1ZLK (Caller's call sign)" is displayed.
NOTE: The Automatic Reply function temporary sets
the received call sign to the destination call sign.
To record the voice signal
You can record a voice announcement for the Auto
Reply function in "DV Auto Reply" on the Set mode.
(p. 12-18)
(Voice Memo > DV Auto Reply)
7-12