Calling An Individual Station - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>

Calling an individual station

You can make a call to an individual station when the
station call sign is selected in "TO" (Destination).
When you call an individual station call sign through a
gateway, your call is automatically sent to the last re-
peater that the station accessed. So, even if you don't
know where the station is, you can make a call using
call sign routing.
1. Set "FROM" (Access repeater)
Touch [DR].
q
Check whether or not "FROM" is selected.
w
• If "FROM" is not selected, touch the "FROM" field.
Touch the "FROM" field.
e
• Opens the "FROM SELECT" screen.
Touch "Repeater List.
r "
• Opens the "REPEATER GROUP" screen.
Touch the repeater group where your access repeat-
t
er is listed. (Example: "11: Japan")
Touch your access repeater. (Example: "Hirano")
y
• Returns to the DR screen, and the selected repeater
name is displayed in "FROM."
2. Set "TO" (Destination)
Touch the "TO" field.
u
• Check whether "TO" is selected.
Touch the "TO" field again.
i
• Opens the "TO SELECT" screen.
Touch "Your Call Sign.
o
• Opens the "YOUR CALL SIGN" screen.
!0 Touch the destination station. (Example: "TOM")
• Returns to the DR screen, and the selected station name
is displayed in "TO."
3. Hold down [PTT] to transmit
• The LED1 on the microphone lights red.
6-15
"