Precautions - Icom ID-5100A Full Manual

Previous view
15
Bluetooth ® OPERATION

Precautions

R DANGER HIGH VOLTAGE! NEVER
tenna connector during transmission. This may result in an
electrical shock or burn.
R WARNING RF EXPOSURE!
Radio Frequency (RF) energy. Extreme caution should be ob-
served when operating this transceiver. If you have any ques-
tions regarding RF exposure and safety standards please
refer to the Federal Communications Commission Office of
Engineering and Technology's report on Evaluating Compli-
ance with FCC Guidelines for Human Radio Frequency Elec-
tromagnetic Fields (OET Bulletin 65).
R WARNING! NEVER
tions to the device.
R WARNING! NEVER
with wet hands. This may result in an electric shock or may
damage the transceiver.
R WARNING! NEVER
touch any internal part or connectors on the rear panel of the
transceiver. This may result in an electric shock or this could
cause a fire or damage the transceiver.
Place the transceiver in a secure place to avoid inadvertent
use by children.
R WARNING!
Immediately turn the transceiver power
OFF and remove the power cable if it emits an abnormal
odor, sound or smoke. Contact your Icom dealer or distributor
for advice.
DO NOT
place the transceiver against walls or putting anything
on top of the transceiver. This will obstruct heat dissipation.
DO NOT
place the transceiver in excessively dusty environ-
ments or in direct sunlight.
DO NOT
operate the transceiver near unshielded electrical
blasting caps or in an explosive atmosphere.
DO NOT
use harsh solvents such as benzine or alcohol to
clean the transceiver, as they will damage the transceiver's
surfaces. If the transceiver becomes dusty or dirty, wipe it
clean with a soft, dry cloth.
DO NOT
drop, impact or vibrate this device. This may dam-
age to the unit.
The Bluetooth ® communication range may vary, depending
on the environment in which the device operates.
Microwave ovens or Wireless LAN may cause an interfer-
ence.
In that case, stop using those devices or move away from
them
This Bluetooth ® device has a range of use. If the communi-
cation is unstable, use the device within the range.
touch an an-
This transceiver emits
make any changes or modifica-
operate or touch the transceiver
let metal, wire or other objects
15-3