Vfo Scan And A Priority Channel - Icom ID-5100A Full Manual

Previous view
5
PRIORITY WATCH
VFO scan and a priority channel (Continued)
4. During a Priority watch
Checks the selected priority channel every 5 seconds,
while VFO scanning.
Example: Checks Memory channel "000" while VFO scanning
Appears
Blinks
Example: Checks Bank channel "A00" while VFO scanning
Appears
Blinks
Example: Checks Call channel "C0 (144)" while VFO scanning
Appears
Blinks
5. When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The "PRIO" icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "S" icon blinks. The VFO
scan resumes.
Appears
Checks the Memory channel "000" every 5 seconds.
Appears
Checks the Bank channel "A00" every 5 seconds.
Appears
Checks the Call channel "C0 (144)" every 5 seconds.
Example: For a Memory channel
Automatically selects the priority channel.
Blinks
Remains in the VFO mode.
5-9
Blinks
Blinks