D Sing "Your Call Sign - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)
D Using "Your Call Sign"
The "Your Call Sign" memory stores programmed "UR"
(destination) call signs.
When you select an individual station call sign for the
"TO" (Destination) setting using "Your Call Sign," you
can make a gateway call.
When you call the destination through a gateway, the
signal is automatically sent to the last repeater that the
station accessed.
So, even if you don't know where the station is, you can
make a call.
NOTE: If the repeater, set in "FROM" (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
Example: Select "TOM" from the "Your Call Sign."
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Your Call Sign."
r
• Opens the "YOUR CALL SIGN" screen.
Touch the destination name or call sign.
t
(Example: "TOM")
• The transceiver returns to the DR screen, and "TOM" is
displayed in "TO."
For your reference:
After selecting a destination,
you can select another station
preset in your transceiver by ro-
tating [DIAL].
6-25