D [Dial] Operation During A Scan; D Squelch Setting For A Scan; D Tuning Step For A Vfo Scan; D Skip Function - Icom ID-5100A Full Manual

Previous view
4
SCAN OPERATION
Scan (Continued)

D [DIAL] operation during a scan

• If desired, rotate [DIAL] to switch the scanning direc-
tion during a scan.
• When the scan is paused, rotate [DIAL] to resume
the scan.

D Squelch setting for a scan

The squelch level can be changed to suit your operat-
ing needs. Set the squelch level to open the squelch,
according to the received signal strength.
• During a scan, rotate [SQL] to adjust the squelch
level.

D Tuning step for a VFO scan

The selected tuning step is applied to the scan.
For a program scan or program link scan, set the tuning
step in the program scan edge ranges.

D Skip function

The skip function speeds up scanning by not scan-
ning those frequencies set as skip channels. (p. 4-9,
p. 4-10)
When the "Program Skip" item is set to OFF, the Scan
Skip function cannot be used. (p. 12-14)
(Scan > Program skip)

D Temporary Skip timer

The Temporary Skip function temporarily skips unwant-
ed frequencies during a scan, for the set time period.
• These settings can be changed in the Menu screen.
(p. 4-11)
(Scan > Temporary Skip Timer)

D Receive mode during a scan

• The selected mode is used by the scan.
• During a memory or bank scan, the mode programmed
into the channel is used by the scan.
Scanning in the FM mode
4-3
Blinks
Blinks
Displays the scan type