Icom ID-5100A Full Manual page 237

Previous view
12
MENU SCREEN
Scan items (Continued)
Program Link
(Default: Refer to the diagram
Scan > Program Link
This item sets the link function for two or more program
scan edge ranges to be sequentially scanned during
the Program Link Scan.
The link function scans all frequencies in the scan
range.
Default settings of the Program Link
The Program Scan Edge channels "01" and "02" are set
in the Program Link number "0" as the Default.
Program Link
0
Edit Name
1
9
Program Link number (0 to 9)
• The Program Link number screen shows the frequen-
cy range. (The default scan edge frequency may dif-
fer, depending on the transceiver version.)
• You can add a link setting with touching [QUICK] when
two or more pairs of Program Scan Edge channels
are programmed.
NOTE: The "Add" item will not be displayed when
only one program scan edge range is programmed,
or no programmed scan channel (00 to 24) is left to
add to the selected link channel.
below)
01 144.000−146.000
02 430.000−440.000
Blank
Program Scan Edge channel
Adding a Scan Edge channel to the Program Link
Touch a Program Link number between 0 and 9.
q
Touch [QUICK].
w
Touch "Add."
e
Touch a programmed scan number you wish to as-
r
sign to the selected link channel.
Push [MENU].
t
• Closes the Menu screen.
Deleting the link channel
Touch a Program Link number between 0 and 9.
q
Touch the programmed scan number you wish to de-
w
lete.
Push [QUICK].
e
Touch "Delete."
r
Push [MENU].
t
• Closes the Menu screen.
12-15
(Example: 00: 118.000-550.000)
(Example: 02: 430.000-440.000)