Icom ID-5100A Full Manual page 282

Previous view
12
MENU SCREEN
Display items (Continued)
Choose your language carefully
When the system language of the transceiver is set to Japanese, the transceiver has
the capability to display both English and Japanese characters. HOWEVER, if you se-
lect Japanese as the display language, all menu items throughout the transceiver sys-
tem will be displayed in only Japanese characters. There will be no English item names.
Unless you are fluent in reading Japanese characters, use this feature with extreme
caution.
If you change the transceiver's language to Japanese, and can't understand the menu
system in the new setting, you will have to change the language back to English in
"Display Language" or "System Language" (this item), or by doing a partial reset of the
transceiver CPU. A partial reset will not clear your call sign databases.
To do a partial reset of the CPU, do the following steps:
1. Touch [MENU].
2. Touch [√] one or more times to select the third page, and touch the item.
3. Touch [√] one or more times to view the item as show below, and touch it.
4. Touch the upper item.
5. The dialog appears. Touch the left option.
- The transceiver displays "PARTIAL RESET," then the partial reset is completed.
12-60