Dsetting The Gps Alarm Function To All Memories (All Gps Memories) - Icom ID-52A Advanced Manual

6
GPS OPERATION (ADVANCED)
GPS Alarm

DSetting the GPS Alarm function to All Memories (all GPS Memories)

[MENU] > GPS > GPS Alarm
1� Push [MENU]�
2� Select "GPS Alarm" in the "GPS" menu�
3� Select "Alarm Select�"
4� Select "Group�"
5� Select "All Memories�"
• Returns to the GPS ALARM screen�
L If you want to set the alarm to a specific GPS
Memory group, select "(No Group)" or "A" to "Z�"
L To exit the MENU screen, push [MENU]�
L Information
• When either one of the group's stations enters the set
range, the alarm sounds 3 times�
• When the transceiver sounds a GPS Alarm, "GPS
ALARM" is displayed on the screen, and " " blinks�
See the illustration below�
• To cancel the GPS Alarm function, select "OFF" in step
4 to the left�
"GPS ALARM" is displayed on the screen
and the alarm sounds 3 times�
TIP: When selecting "All Memories," "No Group," or
a GPS Memory group (A ~ Z) in step 5 to the left,
you also have to set "Alarm Area (Group)" to use the
GPS Alarm function� (p� 6-43)
([MENU] > GPS > GPS Alarm > Alarm Area (Group))
6-28
Blinks
GPS ALARM