Icom ID-5100A Full Manual page 194

Dual band transceiver
Hide thumbs Also See for ID-5100A:
Table of Contents

Advertisement

Previous view
8
GPS OPERATION
GPS Logger function (Continued)
For your information— About the recorded NMEA sentence for GPS logging
Regarding the GPS logging data of the ID-5100A/E, each sentence corresponds to the NMEA standard and
is recorded in the following format.
D GGA sentence
(e.g.) $GPGGA,161229.487,3723.2475,N,12158.3416,W,1,07,1.0,9.0,M,25.5,M,3,0000*18<CR><LF>
q
w
q GGA protocol header ( $GPGGA)
w UTC of position (16:12:29.487)
e Latitude (North 37º 23.2475') N=North, S=South
r Longitude (West 121º 58.3416') E=East, W=West
t GPS quality indicator (1)
0=Fix not available or invalid, 1=SPS mode
2=DGPS (SPS), 6=Estimated (Dead Reckoning) mode
y Number of satellites in use (7), 00–12
RMC sentence
D
(e.g.) $GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,011212, , ,D*10<CR><LF>
q
w
q RMC protocol header ( $GPRMC)
w UTC of position (16:12:29.487)
e Status (A)
A=Data valid
V=Data invalid/not positioned
r Latitude (North 37º 23.2475 ' ) N=North, S=South
t Longitude (West 121º 58.3416') E=East, W=West
y Speed over ground (0.13 knots)
u Course Over Ground (309.62º; degrees True)
0.00º–359.99º
GSA sentence
D
(e.g.) $GPGSA,A,3,07,02,26,27,09,04, , , , , ,15,1.8,1.0,1.5*33<CR><LF>
q
we
q GSA protocol header ( $GPGSA)
w Mode indicator 1 (A)
M=Manual, forced to operate in 2D or 3D mode
A=Automatic, allowed to automatically switch 2D/3D
e Mode indicator 2 (3)
1=Fix not available,
2=2D (using satellites; less than 3),
3=3D (using satellites; more than 4)
r ID numbers of satellites used in solution ( 07, 02, 26, 27, 09, 04...15 )
01–32 *Shows up to 12 ID's
D
VTG sentence
(e.g.) $GPVTG,309.62,T, ,M,0.13,N,0.2,K,A*03<CR><LF>
q
w
q VTG protocol header ( $GPVTG)
w Course Over Ground (309.62º; degrees True)
0.00º–359.99º
e Course over ground degrees; Magnetic north
r Speed over ground, knots (0.13 knots)
t Speed over ground, kilometer per hour (0.2 km/hr)
e
r
r
t
e
r
t y u i
r
t
u
i
e
y
y
u
i
o
!0
t
u Horizontal Dilution of Precision (1.0) 0.0–50.0
i Altitude re: mean-sea-level (geoid), meters
(9.0 meters)
o Geoidal separation, meters (25.5 meters)
!0 Age of Differential GPS data (3 seconds)
!1 Check Sum (*18) Error detection data
started with "*" (hex code)
!2 End code
*Blank shows when not positioned.
y
u
i
o
i UTC date of position ('12 Dec 1st) yymmdd
o Mode Indicator (D)
A=Autonomous mode, D=DGPS,
E=Estimated (dead reckoning) mode,
N=Data not valid, R=Almanac data
!0 Check Sum (*10) Error detection data
started with "*" (hex code)
!1 End code
*Blank shows when not positioned.
o
t Position Dilution of Precision (1.8) 0.0–50.0
y Horizontal Dilution of Precision (1.0) 0.0–50.0
u Vertical Dilution of Position (1.5) 0.0–50.0
i Check Sum (*33) Error detection data
started with "*" (hex code)
o End code
*Blank shows when not positioned.
y Mode Indicator (A)
A=Autonomous mode, D=DGPS,
E=Estimated (dead reckoning) mode,
N=Data not valid, R=Almanac data
u Check Sum (*03) Error detection data
started with "*" (hex code)
i End code
*Blank shows when not positioned.
8-40
!1
!2
!0
!1

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ID-5100A and is the answer not in the manual?

Questions and answers

Dwight
April 8, 2025

How many memories?

1 comments:
Mr. Anderson
April 9, 2025

The Icom ID-5100A has a total of 1000 Memory channels.

This answer is automatically generated

Dwight Compton
April 8, 2025

Can you put FM, DStar 2m 440 all in one memory or their multi memory channels?

1 comments:
Mr. Anderson
April 9, 2025

Yes, the Icom ID-5100A can store both FM and D-Star frequencies in its memory channels. Each memory channel can store operating mode, which includes FM and D-Star, along with other settings like frequency, duplex direction, tone settings, and call signs.

This answer is automatically generated

Subscribe to Our Youtube Channel

This manual is also suitable for:

Id-5100e

Table of Contents

Save PDF