Requesting Repeater Information - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>
Reflector operation (Continued)
D Requesting repeater information
When you send the repeater information command, an
ID message is sent back.
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Reflector."
r
• Opens the "REFLECTOR" screen.
Touch [ √] to select the next page.
t
Touch "Repeater Information."
y
• The transceiver returns to the DR screen.
• "Repeater Information" and "I" are displayed in "TO."
Hold down [PTT] to send the repeater information
u
command.
• The LED1 on the microphone lights red.
Release [PTT] to hear the repeater ID message.
i
6-34