Vox Function; D Using The Vox Function; D Setting The Vox Level - Icom ID-5100A Full Manual

Previous view
15
Bluetooth ® OPERATION

VOX function

The VOX (Voice-Operated Transmission) function tog-
gles the transceiver between transmit and receive by
your voice. This function provides hands-free opera-
tion.
You can use the VOX function with the optional VS-3 or
a third party's Bluetooth ®
Depending on the headset, the VOX function may be
disabled because of the differences in microphones.

D Using the VOX function

Touch [MENU].
q
Touch "VOX."
w
(Bluetooth Set > Headset Set > VOX > VOX)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch "ON."
e
Touch [MENU].
r
• Closes the Menu screen.
• "VOX" appears.
Appears
NOTE:
During receiving a signal or sounding a beep, the
transceiver does not switch to transmit by your voice.
headset.
If the transceiver does not connect to a Bluetooth
headset, you cannot use the VOX function, even if the
"VOX" item is set to ON.
Be sure to check the Bluetooth
the transceiver and the headset before using the VOX
function.

D Setting the VOX level

Touch [MENU].
q
Touch "VOX Level."
w
(Bluetooth Set > Headset Set > VOX > VOX Level)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
While speaking into the headset microphone, touch
e
[+] or [–] to adjust the VOX level.
• The VOX level can be adjusted between 1 (minimum) and
10 (maximum), or turned OFF. (Default: 5)
• Higher values make the VOX function more sensitive to
your voice.
• "VOX" appears above [+] when the TX level audio is in-
put.
Touch [MENU].
r
• Closes the Menu screen.
• If the S-meter does not display the output power
level, and the transceiver does not transmit, set the
VOX delay time in the Menu screen. (p. 12-64)
(Bluetooth Set > Headset Set > VOX > VOX Delay)
• When the VOX function is ON, you can adjust the
VOX level by pushing [+] or [–] on the VS-3 while
transmitting.
• When the VOX function is ON, you can adjust the
VOX level by rotating [DIAL] while transmitting.
NOTE:
We recommend you set the microphone gain in the
Menu screen or the headset, before setting the VOX
level.
(Function > MIC Gain)
15-8
®
connection between
"VOX" appears
®