Pairing With The Data Device - Icom ID-5100A Full Manual

Previous view
15
Bluetooth ® OPERATION
Connecting to a Bluetooth
Before connecting to the Bluetooth
pair with it.
• How to pair (see below)
• How to connect (p. 15-14)
D Pairing with the data device
This section describes how to pair with an Android
device.
1. Preparing the Android
2. Turning ON the Bluetooth
Touch [MENU].
q
Touch "Bluetooth."
w
(Bluetooth Set > Bluetooth)
• If the item is not displayed, touch [∫] or [√] one or more
times to select another page.
Touch "ON."
e
® device
® device, you must
® device
® (Transceiver)
®
The Bluetooth
pending on the environment in which the device oper-
ates. Microwave ovens or Wireless LAN may cause
interference.
In that case, stop using those devices or leave more
space between the Bluetooth
devices.
This Bluetooth ®
communication is unstable, use the device within the
range.
®
3. Entering the pairing reception mode
Touch "<<Pairing Reception>>."
r
Turn ON Bluetooth
within the displayed time period.
When the time runs out, the transceiver exits
the Pairing reception mode.
4. Turning ON the Bluetooth
Turn ON Bluetooth
t
• See the instruction manual of the Android
details.
• The Android ® device displays the UT-133 Bluetooth
name on the screen.
- You can confirm the UT-133's name on the "BLUE-
TOOTH DEVICE INFORMATION" screen. (p. 12-66)
15-12
communication range may vary de-
®
device and the other
device has a range of use. If the
(Transceiver)
® with your Android ® device
® (Android
® ®
with your Android
(Default: ICOM BT-001)
☞ Continued on the next page.
® device)
device.
®
device for
® unit