D Setting The Gps Alarm Function To Rx; (A Caller Station) - Icom ID-31A PLUS Advanced Manual

5
GPS OPERATION
GPS Alarm

D Setting the GPS Alarm function to RX

(a caller station)

MENU > GPS > GPS Alarm
1� Push [MENU].
2� Select "GPS."
3� Select "GPS Alarm."
4� Select "Alarm Select."
5� Select "RX."
▼
• Returns to the GPS ALARM screen.
L If you want to set the alarm to a specific GPS
Memory, select "Memory" and then select a GPS
Memory in a GPS Memory group.
L To exit the MENU screen, push [MENU].
[Up]
[ENT]
[Down]
Information
L
• When a station with its GPS Alarm set enters within
an approximate 1 kilometer (1094 yard) range,
the alarm sounds once. When it enters within an
approximate 500 meter (547 yard) range, the alarm
sounds 3 times.
• When the transceiver sounds a GPS Alarm, "GPS
ALARM" pops up on the screen, and "S" blinks.
See the illustration below.
• To cancel the GPS Alarm function, select "OFF" in
step 5 to the left.
"GPS ALARM" pops up on the screen and
the alarm sounds, depending on the set range.
NOTE: Even if "RX" is selected in step 5, when
the received signal has no position data, the GPS
Alarm does not sound.
TIP: When selecting "RX" or a specific GPS
Memory in step 6 to the left, you also have to set
Alarm Area (RX/Memory) to use the GPS Alarm
function. (p. 11-14)
( MENU > GPS > GPS Alarm > Alarm Area (RX/
Memory))
5-27
Blinks