Options - Icom ID-5100A Full Manual

Previous view
12
MENU SCREEN
GPS items (Continued)
GPS Logger
GPS > GPS Logger > GPS Logger
Turn the GPS Logger function ON or OFF.
This function logs the position, altitude, course, speed
and number of satellites being used.
• OFF: Turns OFF the function.
• ON: The transceiver automatically logs GPS data.
Once this function is turned ON, the GPS data
will be continuously logged until turning it OFF,
even if the transceiver power is turned OFF, then
ON again.
To use this function:
1. You must first insert an SD card into the trans-
ceiver.
2. You must select "GPS select" for the "Internal GPS"
item.
NOTE:
The log data will be saved on the SD card.
The file name is automatically created, as shown in
the example:
Log start date and time: 2014/4/1 15:30:00
File name: 20140401_153000.log
Record Interval
(Default: OFF)
GPS > GPS Logger > Record Interval
Select the GPS Logger function record interval of 1, 5,
10, 30, or 60 seconds.
GPS Auto TX
GPS > GPS Auto TX
Select an option for the GPS automatic transmission
function.
This function automatically transmits the current posi-
tion data received from a GPS receiver, as well as any
programmed GPS message, at the selected interval.
• OFF:
• 5 sec to 30 min:Transmits the current position data
12-36
Does not automatically transmit the
position data.
( When you push [PTT], the transceiv-
er transmits the position data.)
at the selected interval (5*, 10, or 30
seconds, or 1, 3, 5, 10, or 30 min-
utes).
* Does not appear when you set four
GPS sentences in "GPS Sentence."
NOTE: When the GPS transmit mode is "NMEA," set
the "GPS Select" item to "Internal GPS."
If you set to "Manual" or "OFF," the current position
data will not be automatically transmitted.
(Default: 5sec)
(Default: OFF)