Unlinking A Reflector; Reflector Echo Testing - Icom ID-5100A Full Manual

Previous view
6
D-STAR OPERATION <BASIC>
Reflector operation (Continued)
D Unlinking a reflector
Before linking to another reflector, be sure to unlink the
current reflector.
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Reflector."
r
• Opens the "REFLECTOR" screen.
Touch "Unlink Reflector."
t
• The transceiver returns to the DR screen.
• "Unlink Reflector" and "U" are displayed in "TO."
Hold down [PTT] to unlink the reflector.
y
• The LED1 on the microphone lights red.
D Reflector Echo Testing
This function is a useful check of how well your signal
is getting into the repeater, and you can use it to verify
that your repeater is operating normally.
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Reflector."
r
• Opens the "REFLECTOR" screen.
Touch "Echo Test."
t
• The transceiver returns to the DR screen.
• "Echo Test" and "E" are displayed in "TO."
Hold down [PTT] and speak into the microphone.
y
• The LED1 on the microphone lights red.
Release [PTT] to hear your message.
u
6-33