Connecting To A Bluetooth ® Device; D Pairing With The Data Device - Icom ID-5100A Full Manual

Previous view
15
Bluetooth ® OPERATION
Connecting to a Bluetooth
D
Pairing with the data device (Continued)
5. Sending a pairing request to the transceiver
Touch the displayed UT-133's name to send a pairing
y
request.
• The Android ® device starts to send a pairing request.
• Opens the "Connection request received from ICOM BT-
001. Confirm the following passkey is shown. Passkey:
MMMMM" dialog box on the transceiver.
NOTE:
Depending on the Android
able to pair with the Bluetooth ® device.
6. Receiving a pairing request
When the transceiver receives a pairing request,
u
confirm the displayed passkey is the same as yours,
and then, touch [CONFIRM].
• Pairing starts.
Touch "Pairing/Connect."
i
• After the pairing is complete, the Android
is displayed on the pairing list.
After the pairing is complete, the
Android ® device name is displayed
NOTE:
When you pair with the third party's headset, entering
a PIN code or passkey may be required.
See the instruction manual of the headset for details
to enter a PIN code or passkey.
®
device
(Android ® device)
® device, you may not be
(Transceiver)
® device name
Pairing list
15-13