Vfo Frequency And A Priority Channel - Icom ID-5100A Full Manual

Previous view
5
PRIORITY WATCH
VFO frequency and a priority channel (Continued)
4. During a Priority watch
Checks the selected priority channel every 5 seconds,
while receiving on a VFO frequency.
Example: Checks Memory channel "000" while receiving on 145.000 MHz.
Appears
Priority channel
Example: Checks Bank channel "A00" while receiving on 145.000 MHz.
Appears
Priority channel
Example: Checks Call channel "C0 (144)" while receiving on 145.000 MHz.
Appears
Priority channel
5. When a signal is received
• When "ON" is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The "PRIO" icon blinks on the screen.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 12-14)
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "S" icon blinks on the
screen.
Appears
Checks the Memory channel every 5 seconds.
Appears
Checks the Bank channel every 5 seconds.
Appears
Checks the Call channel every 5 seconds.
Example: For a Memory channel
Automatically selects
the priority channel.
Remains in the VFO mode.
5-5
Blinks
Blinks
Blinks