Resetting The Cpu; D Partial Reset; All Reset - Icom ID-5100A Full Manual

Previous view
17
MAINTENANCE

Resetting the CPU

Occasionally, erroneous information will be displayed
when, for example, first applying power. This may be
caused externally by static electricity or by other fac-
tors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If
the problem is still there, perform a Partial reset or an

All reset.

D Partial Reset

Touch [MENU].
q
Touch "Partial Reset."
w
( Others > Reset > Partial Reset)
• If the item is not displayed, touch [∫] or [√] one or more
times to select the page.
Touch [YES].
e
• The transceiver displays "PARTIAL RESET," then the
partial reset is completed.
A Partial reset resets the operating settings to their
default values (VFO frequency, VFO settings, menu
contents) without clearing the items below:
• Memory channel contents
• Scan Edge contents
• Call channel contents
• Call sign memories
• Message data
• DTMF memory contents
• GPS Memory contents
• Repeater list
17-2