My Station Items; My Call Sign; Tx Message - Icom ID-5100A Full Manual
Dual band transceiver
Hide thumbs
Also See for ID-5100A:
- Basic manual (108 pages) ,
- Brochure & specs (4 pages) ,
- Operating manual (2 pages)
Table of Contents
Advertisement
Previous view
12
MENU SCREEN
My Station items
My Call Sign
My Station > My Call Sign
The transceiver has a total of 6 memories to store your
own call signs.
A call sign of up to 8 digits can be entered.
Also, a note of up to 4 characters, for operating radio
type, area, and so on, can be entered.
• See page 6-5 for MY call sign programming.
• To select a different My Call Sign, touch the desired
call sign to set.
TX Message
My Station > TX Message
The transceiver has a total of 5 memories to store
short messages for simultaneous transmission in the
DV mode.
Enter a message of up to 20 alphanumeric characters
for each memory.
• See page 7-2 for TX message entry.
• To changing the TX Message, touch the desired
message to select it.
• When no message transmission is desired, select
"OFF."
12-43
- Quick Links:
- About the Sd Card
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ID-5100A and is the answer not in the manual?
Questions and answers
How many memories?
The Icom ID-5100A has a total of 1000 Memory channels.
This answer is automatically generated
Can you put FM, DStar 2m 440 all in one memory or their multi memory channels?
Yes, the Icom ID-5100A can store both FM and D-Star frequencies in its memory channels. Each memory channel can store operating mode, which includes FM and D-Star, along with other settings like frequency, duplex direction, tone settings, and call signs.
This answer is automatically generated