Automatic Reply Function - Icom IC-92A Instruction Manual

7
DV MODE OPERATION (Optional UT-121 is required for IC-92A)
D RX message indication
The received message can also be checked in DV set mode.
q Select "RX MESSAGE" in message/position set mode.
➪
❮MENU screen❯ ❮MESSAGE/POSITION❯
(Push [MENU/ ]) (Rotate [DIAL]
• The received message is displayed in RX MESSAGE screen.
RX MESSAGE
MESSAGE: MESSAGE:
r
Hello! Hello!
w Rotate [DIAL] or push [ ](8) to display the station call
sign.
RX MESSAGE
CALLER: CALLER:
r
e Push [ ](5) or [ ](4) to return to MESSAGE/POSITION
screen.
r Push [MENU/
54
➪
❮RX MESSAGE❯
†
, then push [ ](5)
:BACK :BACK :CALLER :CALLER
BBBBBB BBBBBB
/ /
:BACK :BACK :MSG :MSG
] to return to frequency indication.

■ Automatic reply function

The automatic reply function replies to calls by a station that
specifi ed your call sign.
Two methods of replying are available— one is making a
reply call with your own call sign, and other one is making
a reply call with reply voice audio that has been recorded in
†
.)
DV voice memory.
D Automatic reply function setting
q Enter "AUTO REPLY" in DV set mode.
❮MENU screen❯
(Push [MENU/
• AUTO REPLY screen is displayed.
w Rotate [DIAL]
OFF : Deactivate the automatic reply function.
ON : Reply to the call with your own call sign.
VOICE : Reply to the call with the recorded voice memory.
e Push [ ](5).
• Returns to DV SET MODE screen automatically.
r Push [MENU/
(p. 92)
➪ ➪
❮DV SET MODE❯ ❮AUTO REPLY❯
†
]) (Rotate [DIAL] , then push [
†
to select the desired reply condition.
AUTO REPLY AUTO REPLY
OFF
r
ON
VOICE VOICE
] to return to frequency indication.
†
](5) .)
(default)