Automatic Reply Function - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION

Automatic Reply function

When a call addressed to your own call sign is
received, the Automatic Reply function automatically
replies with your call sign. (Default: OFF)
Depending on the setting, a recorded message may
be transmitted with the call sign.
NOTE: The Automatic Reply function temporary sets
the received call sign to the destination call sign.
TIP: To record the Auto Reply message
You can record the Auto Reply message. See page
9-22 for details.
(Voice Memo > DV Auto Reply)
DV Set > Auto Reply
1. Push [MENU].
2. Rotate [DIAL] to select "DV Set," then push [ï].
3. Select "Auto Reply," then push [ï].
4. Select an option.
• ON: Automatically replies with your own call
sign. (No audio reply is sent)
• Voice: Automatically replies with your call
sign and an Auto Reply message
recorded on the microSD card (up to 10
seconds).
L If no card is inserted, or no message is
recorded, replies with your own call sign.
(No audio reply is sent)
• Position: Automatically replies with your own call
sign and your position data using the
internal or external GPS receiver.
L When "GPS Select" is set to "OFF" or
"Manual," the internal GPS receiver is
temporarily turned ON.
When "GPS Select" is set to "External
GPS," but if the external GPS receiver is
not connected, the internal GPS receiver
is temporarily turned ON.
5. Push [MENU].
• Returns to the standby screen, and displays "
L When "ON" or "Voice" is selected, the Automatic
Reply function is automatically turned OFF, when you
push [PTT].
When "Position" is selected, the Automatic Reply
function remains ON, when you push [PTT].
Example: After receiving a call from "JM1ZLK," the
transceiver automatically sends a reply call.
The "TO" setting does not change, but "UR:
JM1ZLK (Caller's call sign)" is displayed.
4-24
."