Automatic Reply Function - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Automatic Reply function

When a call addressed to your own call sign is received,
the Automatic Reply function automatically replies with
your call sign. (Default: OFF)
Depending on the setting, a recorded message or your
position may be transmitted with the call sign.
q Push [MENU] .
w Push D-pad( ) to select the root item ("DV Set"),

and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Auto Reply," and then push

D-pad(Ent).
r Push D-pad( ) to select "ON," "Voice" or "Position."

• ON: Replies with your own call sign. (No audio reply
is sent)
• Voice: Replies with your call sign and any Auto Reply
message recorded on the microSD (up to 10
seconds).
If no microSD card is inserted or no message is
recorded, only your call sign is transmitted.
The transmitted audio can be monitored.
• Position: Replies with your own call sign and transmits
your position using the internal GPS receiver.
(p. 9-13)
When "OFF" or "Manual" is set in "GPS Select,"
the internal GPS receiver is temporarily turned
ON.
When "External GPS" is set in "GPS Select,"
the transceiver transmits your position. But if
the external GPS receiver is not connected, the
internal GPS receiver will be enabled.
t Push [MENU] to exit the MENU screen.
NOTE:
• When "ON" or "Voice" is selected, the Automatic Re-
ply function is automatically turned OFF, when you
push [PTT].
• When "Position" is selected, the Automatic Reply
function is kept to ON, even if you push [PTT].
• The Power Save function is disabled when "ON" or
"Voice" is selected.
• The Power Save function is enabled when "Position"
is selected.
• The Automatic Reply function cannot be used on the
SUB band.
TIP: To record the voice signal
You can record a voice announcement for the Auto
Reply function in "DV Auto Reply" on the MENU
screen. (p. 16-27)
(MENU > Voice Memo > DV Auto Reply)
Appears
After receiving a call from "JG3LUK," the
transceiver automatically sends a reply call.
"TO" setting does not change, but
"UR: JG3LUK (Caller's call sign)"
is displayed.
9-11