Automatic Reply Function - Icom IC-2820H Instruction Manual

5
DV MODE OPERATION (Optional UT-123 is required)

■ Automatic reply function

The automatic reply function replies to calls by a station that
specified your call sign.
Two methods of replying are available: one is making a reply
call with your own call sign, and other one is making a reply
call with reply voice audio that has been recorded in DV voice
memory.
D D Automatic reply function setting
q Push [F•
] to display the function guide.
wPush [MENU](V/MHz•SCAN)
"MENU" screen.
eRotate [DIAL] to select "DV SET MODE," then push
[MAIN•BAND].
rRotate [DIAL] to select "AUTO REPLY," then push
[MAIN•BAND].
t Rotate [DIAL] to select the desired reply condition.
OFF : Deactivate the automatic reply function.
ON : Reply to the call with your own call sign.
VOICE : Reply to the call with the recorded voice memory.
yPush [BACK](V/MHz•SCAN)
return to frequency indication.
55
to display the
(Right band's)
(default)
three times to
(Right band's)
D D Voice memory recording for automatic reply
IMPORTANT!
Set the transceiver for single band operation and/or set mini-
mum [VOL] level for sub band when recording the reply voice.
Otherwise received audio or unwanted noise from sub band
is also recorded into the voice memory.
q Push [F•
] to display the function guide.
wPush [MENU](V/MHz•SCAN)
"MENU" screen.
eRotate [DIAL] to select "DV VOICE MEMO," then push
[MAIN•BAND].
rRotate [DIAL] to select "REPLY VOICE," then push
[MAIN•BAND].
• Bar meter is displayed when the reply voice has already been
recorded.
tWhile pushing and holding [PTT], speak into the micro-
phone.
• Up to 10 seconds of message is recordable.
• The recording stops after 10 second or when [PTT] is released.
yPush [BACK](V/MHz•SCAN)
exit from DV VOICE MEMO screen.
to display the
(Right band's)
three times to
(Right band's)