Initial Operation; Fig. 2 Main Components; Fig. 3 Anti-Tipper / Connector With Battery Cable - Otto Bock A200 Instructions For Use Manual

Delivery / Preparing the Wheelchair for Use
The tool kit, an optional accessory, contains a set of Allen wren-
ches (3, 4, 5 and 6 mm) and one open-end 13 mm wrench.
Fig. 2 Main components
1 Backrest
2 Armrest (side panel)
3 Joystick and control unit
4 Seat cushion
92 Ottobock
|
5 Footrest
6 J oystick
7 Anti-tipper (Fig. 3)
8 Connector with battery cable (Fig. 3)
1
8
2
3
7
4
Fig. 3 Anti-tipper / Connector with battery cable
4.2 Initial Operation
5
6
WARNING
Risk of suffocation. Packaging materials must be kept
out of reach of children.
Prior to putting the power wheelchair into operation, the com-
pleteness (see fig. 2) and function of all its components must
be checked. Insert and charge batteries if need be (see sec-
tion 6.5 / 6.5.1).
Check the firm seat of the battery cable in connector (Fig. 3,
item 8) or insert the cable into the connector.
A200