Removing The Battery Case; Reinstalling The Battery Cable - Otto Bock Xeno Service Manual

6.3.5 Removing the Battery Case

Preparation:
❒ Remove the batteries (see Section 6.3.3).
Steps:
1. Remove the battery case and replace if required.
Properly reassemble all components upon completion of the work.

6.3.6 Reinstalling the Battery Cable

NOTICE
Risk of battery damage. Ensure correct polarity is used when connecting the batteries.
Preparation:
❒ Remove the batteries (see Section 6.3.3).
Tools:
❒ Allen wrench, size 5 mm
Steps:
1. Loosen the four Allen head screws.
2. Flip back the attachment plate with the controller and seat module (see Section 6.4).
3. Remove cable ties.
4. Loosen the battery cable connection to the controller.
5. Remove the battery cable and replace, if required.
Properly reassemble all components upon completion of the work.
1
Figure 16 Battery cable
1 Battery cable connector
26